Equipment · Prep
Cutting Board
A flat, stable surface to prep and carve food without dulling knives or damaging counters. Set a damp paper towel under the board so it will not slip.
plastic (HDPE, polypropylene)
rubber (synthetic)

Cutting Board recipes
What to make with a cutting board
3 recipes
Size
Which size cutting board do you need?
| Size | Fits | Good for |
|---|---|---|
| Small (8×10 in) | 1 apple, a handful of herbs, 1 lemon | 1 serving |
| Medium (10×14 in) | 1 onion plus herbs, sandwich prep | 2 servings |
| Large (12×18 in) | A whole chicken to break down or carve; sheet-pan-size prep | 4 servings |
| XL (18×24 in) | Large roasts, brisket or batch prep | Heavy; best if it lives on the counter. |
Materials
Which material for a cutting board?
| Compare | Hardwood (maple, walnut, cherry, beech) | Plastic (HDPE, polypropylene) | Rubber (synthetic) | Bamboo | Paper-composite (Richlite-type) |
|---|---|---|---|---|---|
| Heat | Not for hot pans | Not for hot pans | Not for hot pans | Not for hot pans | Not for hot pans |
| Acidic food | Resists short contact; wipe spills | Yes | Yes | Resists staining; wipe spills | Yes |
| Oven | No | No | No | No | No |
| Weight | 5–15 lb | 2–6 lb | 6–12 lb | 4–10 lb | 5–12 lb |
| Care | Hand-wash, dry upright; oil monthly. | Dishwasher if allowed, or hand-wash and sanitize. | Hand-wash; resurface with light sanding if scarred. | Hand-wash; oil as needed. | Follow maker; many are dishwasher-safe. |
| Best for | Knife-friendly daily prep and carving | Raw meat, color-coding, low-maintenance | Professional prep; grippy and gentle on knives | Light prep; harder feel under the knife | Slim, stable boards with easy care |
Care
How to clean and care for a cutting board
Hardwood
- Wash right after use with hot water and a little dish soap. Do not soak.
- Dry immediately; stand on edge to air-dry.
- Sanitize after raw meat: wipe with a fresh solution of 1 tbsp unscented liquid chlorine bleach in 1 gallon water; let sit 1 minute, then rinse and air-dry.
- Deodorize stains/odors: sprinkle coarse salt or baking soda, scrub with half a lemon, wipe clean.
- Oil monthly or when dry: food-grade mineral oil; wipe off excess. For extra protection, finish with a beeswax-mineral oil board cream.
Plastic
- Scrape scraps with a bench scraper.
- Dishwasher if the board is marked dishwasher-safe; the heat also sanitizes.
- Hand-wash option: hot soapy water, then sanitize with a fresh bleach solution (1 tbsp per gallon water), rinse and air-dry.
- Retire or resurface if deep grooves trap residue.
Rubber
- Hand-wash hot soapy water; rinse and air-dry. Many are not dishwasher-safe - check the maker.
- Sanitize with dilute bleach (1 tbsp per gallon water), rinse and air-dry.
- Lightly sand or plane to refresh the surface when scarred.
Bamboo
- Hand-wash and dry right away; do not soak or dishwasher.
- Oil occasionally with food-grade mineral oil to prevent splitting.
Paper composite
- Follow the maker. Many tolerate the dishwasher; otherwise hand-wash and dry.
- Avoid prolonged high heat and open flames.
No cutting board?
What to use instead of a cutting board
| Instead | What changes |
|---|---|
| Sheet pan | Works for carrying or resting foods; not knife-friendly and can dull blades. |
| Flexible plastic mats | Good on top of a larger, stable board for color-coding and easy transfer. |
| Large platter or tray | Fine for carving and serving; protect knives and edges; avoid aggressive chopping. |
Buying
What to look for
- Size: 12×18 inches handles most home prep; larger for roasts
- Thickness: at least ¾ inch for wood so it stays flat
- Stability: non-slip feet or use a damp towel underneath
- Closed-grain hardwoods (maple, cherry, walnut, beech) for wood boards
- End-grain wood is gentler on knives; edge-grain is lighter and cheaper
- Juice groove for carving roasts; flat side for chopping
- NSF certification for commercial plastic; color-coding helps prevent cross-contamination
- Weight you can lift to the sink; grips or handholds help
Affiliate links are always labeled. RecipeTag may earn a commission, which never changes what we recommend.
FAQ
Cutting Board questions
What type of cutting board is best?
Pick based on how you cook and clean. For most home kitchens: a large 12×18-inch plastic board for raw meat (dishwasher-safe) and a large hardwood board (maple, walnut, beech, cherry) for daily chopping and serving. Rubber boards are great if you want pro-level grip and knife friendliness. Avoid boards that slide or are too small for your knife.
What is the healthiest material for a cutting board?
Hardwood and NSF-certified plastic are both safe when cleaned and sanitized. Plastic can go in the dishwasher if marked. Wood needs hand-washing and periodic oiling, but is gentle on knives. Safety comes from cleaning: wash, sanitize after raw meat, and air-dry.
What do professional chefs use as cutting boards?
In many pro kitchens you will see large NSF plastic or synthetic rubber boards because they grip the counter, are easy to sanitize, and can be resurfaced or replaced. Butcher shops and some chefs also use heavy end-grain wood blocks for carving.
What do Japanese use for cutting boards?
Common options in Japan include softwood hinoki (Japanese cypress) boards, which are gentle on knives, and soft rubber boards that grip the counter. Many sushi bars use soft poly or rubber boards for sanitation and knife care.
What do chefs wipe their cutting boards with?
First scrape with a bench scraper or paper towel. Then wash with hot soapy water. For sanitizing nonporous boards, use a fresh bleach solution (1 tbsp unscented bleach per 1 gallon water), let sit about 1 minute, then rinse and air-dry. For wood, wash, then sanitize lightly if needed and dry; oil after it fully dries.
What cutting board do sushi chefs use?
Often a soft, grippy rubber or soft poly board that is gentle on fine edges and easy to sanitize. Some also use hinoki for fish prep at home; in restaurants, nonporous boards are common for sanitation.
Which butcher block cutting board is the best?
A thick end-grain hardwood block (often maple) is the classic: very durable, self-healing under the knife, heavy and stable. Choose at least 2 inches thick if it will stay on the counter. Edge-grain maple is a lighter, more affordable alternative.
What wood to avoid for cutting boards?
Avoid open-pored woods (oak, ash), very soft woods (pine, fir), and unknown exotic or oily woods that can be brittle or carry strong odors. Choose closed-grain hardwoods like maple, beech, walnut or cherry.
Where can I find thick plastic cutting boards?
Check restaurant supply stores, online restaurant suppliers and commercial kitchen sections. Search for “NSF cutting board” or “HDPE 12×18×½ inch (or thicker).”
Can you use a wood cutting board for meat?
Yes. USDA accepts both wood and plastic boards for meat. Use a separate board for raw meat and poultry, wash right after use, sanitize, and air-dry. Replace or resurface if the surface has deep grooves.
Why do restaurants not use wooden cutting boards?
Many choose plastic or rubber because health codes require nonporous, easily sanitized surfaces and because they can run plastic boards through a commercial dishwasher. Some codes allow wood if maintained, but plastic or rubber is lower-maintenance at scale.
Does vinegar disinfect a cutting board?
Vinegar helps with odors and can reduce some microbes, but it is not a registered disinfectant. For sanitizing, use a fresh bleach solution (1 tbsp unscented bleach per 1 gallon water) on nonporous boards or run a dishwasher-safe board through a hot dishwasher cycle.
Related




