Dinner · British · Deep fried
Fish and Chips Recipe
Make pub-style Fish and Chips at home: double-fried russet chips and 1-inch white fish fillets dipped in very cold beer batter, fried at 375°F (190°C) until deep golden and 145°F (63°C). A British chippy classic.
Checked for culinary, food-safety and allergen issues on Nov 22. Nutrition estimated from USDA data.

Why this works
- Cold, carbonated batter fries lighter and stays crisp.
- Double-frying the chips builds a fluffy interior and a crisp shell.
- Drying and lightly flouring the fish helps the batter adhere.
How to make Fish and Chips
- 1
Prep everything
Set a wire rack in a rimmed sheet pan and place it near the stove. Set out the heavy Dutch oven, a clip-on deep-fry thermometer, a spider or slotted spoon, and tongs. Chill 12 fl oz cold beer and a large mixing bowl for the batter in the coldest part of the fridge. Cut 1 large lemon wedges into wedges. Measure 1 cup flour, 1⁄2 cup cornstarch, 1 tsp baking powder, and 1 tsp salt into a second large mixing bowl (don't add cold beer yet).
Look for: Tools are set, beer is very cold, lemon is wedged, and dry batter ingredients are measured.
Most common problem here: letting the beer warm up on the counter.
- 2
Set up and heat oven
Place a second wire rack in a rimmed sheet pan and heat the oven to 200°F (93°C). You will hold cooked Fish and Chips here so everything stays hot and crisp.
Oven 200°FLook for: Oven reads 200°F on its display.
Most common problem here: setting the oven hotter than 200°F, which can dry out the fish.
- 3
Cut and soak the chips for Fish and Chips
Slice 21⁄2 lb russet potatoes into ½-inch planks, then slice into ½-inch-thick sticks. Cover with cold water and soak 20 to 30 minutes to remove excess starch, then drain.
Look for: Potato sticks are even ½-inch thick and the soak water turns cloudy.
Most common problem here: uneven thickness, which cooks unevenly.
- 4
Dry the potatoes well for Fish and Chips
Spread the drained russet potatoes on towels and pat very dry. Any surface water will cause spattering. It will also make the chips steam instead of crisp.
Look for: No visible moisture on the potato sticks; towels are damp.
Most common problem here: rushing this step and leaving moisture that will sputter in hot oil.
- 5
Preheat the oil to 300°F for Fish and Chips
Pour 10 cups frying oil into a heavy Dutch oven to about 2 inches deep. Clip a deep-fry thermometer to the pot. Heat over medium to 300°F (149°C). Never leave hot oil unattended.
MediumLook for: Oil reads 300°F on the deep-fry thermometer.
Most common problem here: heating too fast and overshooting 300°F.
- 6
First-fry the chips for Fish and Chips
Fry a handful of russet potatoes at a time at 300°F until tender but still pale, 6 to 8 minutes. Lift with a spider and drain on the rack. Repeat. This cooks the centers.
MediumLook for: Chips are pale, bendable, and tender in the center when pierced.
Most common problem here: crowding the pot, which drops the oil temperature.
- 7
Mix the cold beer batter for Fish and Chips
In the chilled mixing bowl, whisk the measured flour, cornstarch, baking powder, and salt. Pour in cold beer and whisk just until smooth. The cold bowl and cold beer will keep the batter at the right temperature. Use it soon.
Look for: Smooth, pourable batter that lightly coats a spoon in a thin, even film.
Most common problem here: overmixing or letting the batter warm up.
- 8
Season, dry, and flour the fish for Fish and Chips
Pat 2 lb fish fillets very dry and cut into 4 portions if needed. Season with 3⁄4 tsp salt. Dredge lightly in 1⁄2 cup dredging flour, shaking off excess. This helps the batter stick and keeps it from sliding off.
Look for: Fish pieces are dry, seasoned, and dusted with a thin, even coat of flour - no clumps or wet spots.
Most common problem here: too much flour, which makes a thick, bready crust.
- 9
Heat the oil to 375°F for Fish and Chips
Raise the oil to 375°F (190°C). Work with 1 or 2 fish pieces at a time. This avoids crowding and temperature drop.
Medium-highLook for: Oil reads 375°F on the thermometer and rebounds quickly after a test drip of batter.
Most common problem here: adding fish before the oil reaches 375°F, which makes a greasy crust.
- 10
Fry the fish for Fish and Chips
Dip a floured piece of fish fillets into the cold batter. Let excess drip, then lower it into the oil away from you. Fry at 375°F, keeping the oil above 350°F (177°C), until deep golden. An instant-read thermometer in the thickest part should read 145°F (63°C), 4 to 6 minutes. Drain on the rack and keep warm in the oven. Repeat.
Medium-highLook for: Deep golden crust; interior of the thickest piece reads 145°F (63°C).
Most common problem here: letting the oil drop below 350°F, which makes greasy batter.
- 11
Second-fry the chips for Fish and Chips
Return the oil to 375°F (190°C). Fry the par-cooked chips in batches until golden and crisp, 2 to 3 minutes. Drain on the rack and season hot with 1 kosher salt.
Medium-highLook for: Chips are golden, edges blistered, and crisp when tapped.
Most common problem here: skipping the reheat to 375°F before each batch.
- 12
Serve Fish and Chips pub-style
Pile hot fish and chips on warm plates. Serve with 1⁄2 cup malt vinegar, lemon wedges, and 1 cup tartar sauce.
Most common problem here: letting fried food sit uncovered too long before serving.
Complete the meal
Serve Fish and Chips with
Catch the sauce
Something green
Tips for better Fish and Chips
Keep the batter cold. Nest the bowl in ice and whisk in the very cold beer right before frying.
Do not crowd the pot. Fry 1 to 2 fish pieces at a time so the oil stays above 350°F; crowding drops heat and makes greasy crust.
Batter sliding off? The fish wasn’t dry. Pat it very dry, dust with the dredging flour, then dip and fry. Shake off excess flour so the coating stays thin.
Cut chips evenly. ½-inch sticks cook uniformly, par-fry tender at 300°F, then crisp fast on the second fry. Set them on a rack, not paper, so steam can escape.
You can first-fry chips up to 2 hours ahead and hold them uncovered on a rack at room temp. For longer, refrigerate them within 2 hours. Second-fry at 375°F (190°C) right before serving to bring back the crunch.
Unsure the fish is done? Use an instant-read thermometer. Pull each piece when the center hits 145°F (63°C); overcooking dries lean white fish quickly.
Swaps and variations for Fish and Chips
| Instead of | Use | What changes | Swap |
|---|---|---|---|
| Fish fillets | Haddock or pollock fillets, or center-cut halibut | Choose pieces about 1 inch thick. Fry the same way and check 145°F in the center. Thinner fillets cook on the low end of the time window. | |
| Fish fillets | Frozen cod fillets | Thaw fully in the fridge and pat very dry before dredging so the batter sticks. Expect a little more splatter; keep the batter extra cold. | |
| Cold beer | Very cold club soda or sparkling water | Alcohol-free batter with good lift. Keep it icy cold and whisk it in right before frying. Add a tablespoon at a time to reach a thin, pourable batter. | |
| Flour | Rice flour or a cup-for-cup gluten-free blend (also swap for dredging flour) | Use the same weights and keep the batter thin. Use club soda instead of beer if avoiding gluten. Texture is extra crisp and delicate. | |
| Frying oil | Refined peanut oil or refined avocado oil | Both tolerate high heat and fry clean. Peanut oil is a major allergen; avoid if serving anyone with peanut allergy. | |
| Malt vinegar | Apple cider vinegar or white wine vinegar | Similar tang without the malty note. Start with a light splash and adjust to taste at the table. | |
| Tartar sauce | Plain mayonnaise with chopped pickles and a squeeze of lemon | Stir to taste with a pinch of salt. Note: tartar and mayo usually contain eggs; check labels if serving someone with egg concerns. | |
| Russet potatoes | Yukon Gold potatoes | Less fluffy, more creamy inside. Keep the same cut. Par-fry closer to 8 minutes to tenderize before the second fry. |
How to store and freeze Fish and Chips
How long does Fish and Chips last in the fridge?
Store Fish and Chips in the fridge for 3 to 4 days in an airtight container. Refrigerate within 2 hours. Keep fish and chips on a rack in the container if possible so the coating stays drier. Reheat only what you need and bring the fish back to 165°F (74°C).
Can you freeze Fish and Chips?
Yes, you can freeze Fish and Chips for up to 2 months. Cool quickly, then freeze on a sheet pan before transferring to airtight containers. Expect the chips to soften and the batter to lose some crunch. Thaw overnight in the fridge, then re-crisp in a hot oven or air fryer.
How do you reheat Fish and Chips?
Reheat Fish and Chips on a rack over a sheet pan in a 400°F (204°C) oven or in an air fryer at 370°F (188°C) until the fish hits 165°F (74°C), about 8 to 12 minutes from cold. Avoid the microwave; steam makes the coating soggy. Warm sauces separately.
Can you make Fish and Chips ahead?
Yes. For Fish and Chips, you can cut, soak, and first-fry the potatoes up to 2 hours ahead and hold them uncovered on a rack at room temperature. For longer, cool and refrigerate them within 2 hours. Mix the batter and fry the fish right before serving. Keep finished batches hot on a rack in a 200°F (93°C) oven.
Allergens, diet and nutrition
Allergens
- ContainsEggs · tartar sauce. See swaps.
- ContainsFish · fish fillets. See swaps.
- ContainsWheat · flour, dredging flour. See swaps.
- Not identifiedMilk, Shellfish, Tree nuts, Peanuts, Soy, Sesame
“Not identified” means none of the reviewed ingredients list it. It is not an allergen-free guarantee. With a serious allergy, check every label and your kitchen for cross-contact.
Diet
- Contains glutenWheat is in the ingredients.
- 113 g carbs per servingWithout optional additions.
- Dairy-free
- Not vegetarian
Nutrition per serving
Where the calories come from
% Daily Value · 5% or less is low, 20% or more is high
Estimated from USDA FoodData Central for 1 of 4 servings, based on a 2,000-calorie diet. Optional additions not included.
What to drink with Fish and Chips
Chosen for the dish first. We never let a retailer decide a pairing.
Pilsner
Crisp bitterness and bubbles cut the rich fried batter and echo the lager in the batter.
Brut Cava
High acidity and fine bubbles slice through the fried fish and salt, and brighten lemon and tartar sauce.
More about Brut Cava →Ginger Beer (Alcohol‑Free)
Zesty ginger heat and carbonation refresh between bites and stand up to malt vinegar and crispy batter.
Find a drink for any dish →Wine, beer and alcohol-free, chosen by flavor. Tap or hover a name for a quick guide.
More like this
If you liked Fish and Chips
Questions about Fish and Chips
How do you make pub-style Fish and Chips at home?
Cut russet potatoes into ½-inch sticks, soak, dry, and double-fry: 300°F (149°C) to tender, then 375°F (190°C) to crisp. Pat fish dry, season, and flour. Dip in very cold beer batter and fry at 375°F until deep golden and the thickest part hits 145°F (63°C).
What is the best fish for Fish and Chips?
Choose firm, mild white fish about 1 inch thick. Cod is classic for Fish and Chips, with haddock, pollock, or halibut also great. Even thickness cooks evenly. Frozen fillets work if fully thawed and patted very dry so the batter adheres and the oil does not spatter.
What can I use instead of beer in the batter?
Use very cold club soda or sparkling water. Carbonation and cold make a light, crisp coat for Fish and Chips. For wheat-free, use rice flour or a cup-for-cup gluten-free blend for both batter and dredging, and pair it with club soda. Always check labels.
What temperature should the oil be for frying fish?
Heat the oil to 375°F (190°C) and fry 1 to 2 pieces at a time. Keep the oil above 350°F (177°C) so Fish and Chips stay crisp, not greasy. Let excess batter drip off, lower pieces away from you, and let the oil recover between batches for even browning.
Is Fish and Chips healthy?
Fish and Chips is a deep-fried treat, not a light meal. The white fish is lean, but frying the batter and chips adds fat. Keeping the oil between 350°F and 375°F (177°C to 190°C) helps prevent a greasy crust. Serve sensible chip portions and add a vegetable side, such as peas or slaw.
Can you make Fish and Chips in an air fryer or oven?
Wet beer batter won't set in an air fryer or oven. Use a breadcrumb or panko coating instead and cook the fish to 145°F (63°C). Chips can be oven-roasted or air-fried after soaking and drying, but they won't match pub-style texture.
What is the best oil for frying Fish and Chips?
Use a neutral oil with a high smoke point: canola or vegetable are common. Refined peanut oil fries cleanly but is a major allergen, so ask guests. Keep about 2 inches of oil in a heavy pot, monitor with a thermometer, and strain and reuse oil a few times if it still smells fresh.
What sauce do you serve with Fish and Chips?
Malt vinegar, lemon wedges, and tartar sauce. Tartar sauce usually contains eggs, so check labels. For a similar tang without the malt flavor, use apple cider or white wine vinegar. Set the sauces out while the chips finish so you can serve everything hot and crisp.
Is it cheaper to make Fish and Chips at home than to buy them?
It depends on local prices. The main costs are the fish fillets and the 10 cups of frying oil. Strain and reuse the oil a few times if it still smells fresh to spread that cost. Buying whole fillets and cutting your own 4 portions can also help keep the cost down.
How do you dispose of used frying oil?
Let the oil cool completely in the pot. Strain it through a coffee filter or cheesecloth into a sealable container if you plan to reuse it. To dispose, pour the cooled oil into a non-recyclable container with a lid (like its original bottle) and throw it in the trash. Never pour oil down the drain; it can clog pipes.
Ratings and notes for Fish and Chips
No ratings yet. Cook it and be the first.
Cooked it? Love it?
Rate it, add a photo, or tell us what went wrong so we can fix the recipe.
Anything go wrong?
Recipe updates
The last three changes. Your ratings, reports and questions to TagChef drive them.
- Version 1 · First published after culinary, food-safety and allergen checks.
Now it is yours to cook, rate and help improve.





